What fluid to use in an ultrasonic cleaner? | expondo.co.uk (2022)

In many industries, the frequent cleaning of components of various devices (e.g. electronic and mechanical), as well as jewellery, collector’s coins, small tools and other various utensils is necessary. In this case, an ultrasonic cleaner is one of the most effective methods. Ultrasounds quickly and precisely remove dirt, even from hard-to-reach places. They also help fight allergies. In the case of particularly dirty items or items with extensive decorations, it is worth enhancing the cleaning effect. In such situations you will also need the appropriate cleaning fluids, whichimprove the cleaning effect and extend the life of the cleaning device.

What should you use with yourultrasonic cleaner?

(Video) ULTIMATE TIPS For Using An Ultrasonic Cleaner (Must Try)

In the case of cleaning fluid for your ultrasonic cleaner, first of all make sure you use the right type of water. The first thing you need to do to enhance the cleaning performance of an ultrasonic cleaner is use deionised water, which is a natural solvent. It is recommended due to its lack of mineral salts and other impurities. It is alsomore reactive than ordinary water, and does not leave stains on washed items. If you cannot find anythen you could also use distilled water, which is also of a high purity, or at least boiled water. However, the high frequency waves and water alone are sometimes not enough. In order to guarantee a fully satisfactory cleaning effect, an ultrasonic cleaner should be used (usually in the form of a concentrate for dilution with water). This will help get rid of traces of vegetable fats, car lubricants or mineral dirt.

Many shops are full of various products intended for cleaning different types of dirt. Among the wide range of products, you can also find products intended specifically for use in ultrasonic cleaners. Before choosing which product to buy, it is worth getting to know its chemical composition, properties and intended use in order to properly clean your items and make sure it is safe for your equipment. Before deciding to buy ultrasonic cleaning fluid, it’s good to know what it actually contains.

Ultrasonic cleaner for small objectsUltrasonic cleaner for large objects and cleaning a large number of smaller items
Ultrasonic cleanerUltrasonic Cleaner – 3 Litres – 80 W – Basic EcoUltrasonic Cleaner – 22 litres – 360 W
Volume3 l22 l
Container dimensions23,8 x 13,8 x 10,0 cm50 x 30 x 15 cm
Dimensions (LxWxH)17,00 x 30,00 x 23,50 cm59,00 x 33,00 x 36,00 cm
Weight3,24 kg11,70 kg
Ultrasonic power80 W2 x 60 W
Ultrasound frequency40 kHz40 kHz
Heating capacity155 W470 W
Timer0-60 min0-60 min
Maximum heating temperature80°C80°C
Example of use– Smaller medical equipment
– Laboratory equipment
– Jewellery
– Eyeglasses and watches
– Hairdressing accessories
– Metal articles (coins, small parts of mechanisms, etc.)
– Tableware
– Aquarium accessories
– Small and large medical equipment
– Small and large medical and laboratory equipment (instruments, cuvettes, dishes)
– Mechanical components (engine parts covered with grease and dirt)
– Jewellery, glasses and watches
– Hairdressing accessories
– Tattooing accessories
– Diving equipment

What does ultrasonic cleaning fluid contain?

Ultrasonic cleaning fluid usually has a relatively simple chemical composition. Before choosing the right product, however, you shouldbear inmindewhich items it will be used on. What works in cosmetology may not work with old coins. Effective cleaning is often determined by the proper selection of products for a specific material. Below is a list of the substances most often found in professional ultrasonic cleaning fluids available on the market.

  • Non-ionic surfactants(tensides)– these are the primary ingredient in many cleaning fluids and account for about 90% of total surfactant production.They have a very high degreasing potential (compared to other types of surfactants), with a concentration usually <5%. They are good for removing: vegetable and animal fats, mineral and synthetic oils, as well as car lubricants. They are also not sensitive to hard water. Ultrasonic cleaning with a fluid containing non-ionic surfactants is a very good way to effectively clean e.g. a carcarburettor.
  • Anionic surfactantshave a milder effect than non-ionic surfactants, so they are commonly used in cosmetics (including for babies). They are not very effective when it comes to removing greasy dirt and are sensitive to hard water. However, they successfully eliminate organic impurities, e.g. sweat residues and dead skin cells.
  • EDTAis a chemical compound that increases the durability of the fluid and prevents changes in colour and consistency of the finished product. These properties make it widely used in cosmetics. It is commonly used to clean silver coins.
  • Acorrosion inhibitorslows down the process of corrosion This substance creates a layer on the surface of the cleaned metal, which protects it against damage. Another advantage is that the inhibitor protects not only the cleaned elements, but also the ultrasonic cleaner itself. This ingredient is especially recommended for cleaning jewellery with components made of base metals (e.g. nickel and copper). It should be found in fluids for ultrasonic cleaners used for jewellery.
  • Ammoniais a compound of nitrogen and hydrogen with a wide range of applications. Its cleaning qualities are used to remove various types of dirt (e.g. grease in electric ovens, upholstery and carpet stains, soap residue on sanitary facilities) and caring for jewellery. Cleaning with the addition of ammonia is especially recommended for silver, which is the precious metal most susceptible to dirt . Products intended for use with jewellery should also remove remains of polishing pastes.

It is important that the fluid does not contain hydroxides that can damage soft metal objects, e.g. copper and gold. Information about biodegradability should be available on the label.This is a legal requirement.

(Video) How Well Do Ultrasonic Cleaners Really Work?

  • Ultrasonic Cleaner – degas – 6.5 L
  • Ultrasonic Cleaner – 2 litres – degas – sweep
  • Ultrasonic Cleaner – 15 litres – 360 W 379.00 £
  • Ultrasonic Cleaner – 22 litres – 360 W

Homemade cleaning fluidsand solutions

Ultrasonic cleaners are also popular for private use, and some users prefer homemade cleaning fluids. For a much lower cost they often provide similar effects as commercial products specially designed for this type of devices. They also work well in situations whereyou are in urgent need of cleaning fluid. A mixture of half water and half spirit vinegar with a few drops of washing up liquid is very popular among military memorabilia and coin collectors. Baking soda (due to its foaming properties) and wall cleaner work well as a cleaning agents.

Another frequently used ingredient is isopropanol (isopropyl alcohol). Thiswidely available ingredientcan be successfully used as a fluid for ultrasonic cleaners. It is safe on many materials thanks to being chemically neutral. It is mainly used in optics and electronics, and isvery effective in cleaning and maintaining laser diodes in CD/DVD readers. You can use it without additionally diluting with water.

What fluid to use in an ultrasonic cleaner? | expondo.co.uk (7)

ULSONIX ULTRASONIC CLEANERS

FOR USE IN GASTRONOMY, JEWELLERY,
WORKSHOPS, BEAUTY AND HEALTH SALONS

CHOOSE A CLEANER FOR YOUR INDUSTRY

(Video) Is Vinegar + Ultrasonic Cleaner Effective Against Rust?
(Video) Honest Review Of My Small Engine Shop Ultrasonic Cleaner & The Cleaning Solutions I Use

Before using any ultrasonic cleaner fluid

Before using any fluid inanultrasonic cleaner, be sure to check the manufacturer’s recommendations on the label. If necessary, also read the operating instructions providedwithultrasonic cleanersto make sure the given product can be used.Bear in mind that using too weak a product for washing very dirty items will not guarantee the desired effect even after very thorough cleaning, while too strong a product on delicate items could damage them. Ultrasonic cleaning is an effective and generally safe method, however not all items can be treated in this way. For example pearl and coral jewellery, as well as gold/silver-plated jewellery, is not suitable.

By making sure beforehand, you can avoid potential damage or unsatisfactory results. Both the ultrasonic cleaner and the items cleaned in it will retain their colour, shapeandproperties.You will also be satisfied with thefinaleffect.

  • Ultrasonic Cleaner – 28 litres – 480 W – Memory-Quick Eco 589.00 £
  • Ultrasonic Cleaner – 10 litres – 240 W 279.00 £
  • Ultrasonic Cleaner- 0,7 litres – Basic
  • Ultrasonic Cleaner – 6 litres – degas – sweep – pulse
(Video) Using an Ultrasonic Cleaner with Your Pens | FP Basics

FAQs

What fluid to use in an ultrasonic cleaner? | expondo.co.uk? ›

In the case of cleaning fluid for your ultrasonic cleaner, first of all make sure you use the right type of water. The first thing you need to do to enhance the cleaning performance of an ultrasonic cleaner is use deionised water, which is a natural solvent.

What solution works best in ultrasonic cleaner? ›

Alkaline solutions –This type of ultrasonic cleaning solution often has a pH of 10 or more. You can use it for cleaning tin, brass, zinc, copper, stainless steel, cast iron, and steel.

How do you make an ultrasonic cleaning solution? ›

Homemade Ultrasonic Cleaning Solution For Brass - YouTube

What detergent do you use in an ultrasonic cleaner? ›

Generally, all-purpose detergents such as OmegaSupreme and OmegaClean are safe to use with most materials and supply excellent ultrasonic cleaning in most situations.

Can I use dish soap in my ultrasonic cleaner? ›

Taryl's Ultrasonic Cleaner Video - YouTube

Can I use vinegar in my ultrasonic cleaner? ›

People often report good results diluting vinegar with water to a 1:1 ratio when using it in an ultrasonic cleaner. Make sure to immediately rinse metals after ultrasonically cleaning them with vinegar. This avoids any negative effects from long-term exposure to acids.

What can you not put in an ultrasonic cleaner? ›

What Not To Do With Ultrasonic Cleaners
  • Do not place parts or containers directly on the bottom of the cleaning tank—use a tray or wire to suspend items.
  • Don't allow the cleaning solution level to drop more than one inch below the top of the tank.
  • Never use alcohol, gasoline, or flammable solutions.
Apr 10, 2014

Can I just use water in ultrasonic cleaner? ›

While ultrasonic cleaning systems will work with plain water, adding a mild detergent can often speed up the cleaning action. Delicate parts such as semiconductor wafers, printed circuit boards and some medical devices might be damaged by using detergents, so in these applications cleaning with DI water is recommended.

Can I use isopropyl alcohol in an ultrasonic cleaner? ›

It is absolutely not an acceptable industrial process. Some people use IPA alcohol or “white spirits” in ultrasonic tanks to get better cleaning. This is a very dangerous choice and is not recommended.

Do ultrasonic cleaners need solution? ›

While it can be tempting to cut corners by using a dish detergent or an all purpose cleaning fluid in your ultrasonic cleaner, for the machine to work effectively, you need a solution designed for what occurs when ultrasonic energy is injected into liquid.

Do you need detergent in ultrasonic cleaner? ›

A detergent must be used in conjunction with ultrasonic cleaning in order to effectively remove most soils. A multipurpose cleaner is ideal because of its versatility.

Can I use baking soda in ultrasonic cleaner? ›

Baking Soda will help you clean most of your kitchenware, even though the most efficient way would be the ultrasonic cleaner. It will safely and effectively get rid of germs, dirt, bacteria, and other contaminants in an eco-friendly way.

What is the best solution to use in an ultrasonic cleaner for carburetors? ›

Use an ultrasonic cleaning solution concentrate formulated for carburetor cleaning. We have two recommendations, depending on the nature of contaminants. We suggest biodegradable elma tec clean A4, a mildly alkaline concentrate that you dilute to 1 to 5% with water and available in 2.5, 10 and 25 liter containers.

Can I use baking soda in ultrasonic cleaner? ›

Baking Soda will help you clean most of your kitchenware, even though the most efficient way would be the ultrasonic cleaner. It will safely and effectively get rid of germs, dirt, bacteria, and other contaminants in an eco-friendly way.

Can I use isopropyl alcohol in an ultrasonic cleaner? ›

It is absolutely not an acceptable industrial process. Some people use IPA alcohol or “white spirits” in ultrasonic tanks to get better cleaning. This is a very dangerous choice and is not recommended.

Can I use tap water in my ultrasonic cleaner? ›

Using tap water is sufficient. Purified water or distilled water has the same cleaning effect as regular tap water for ultrasonic cleaning. When cleaning silver or copper items where oxidation has darkened the items, special solutions such as SeaClean2, needs to be added to the water to remove the oxidation.

Videos

1. Best Practices For Using Ultrasonic Cleaners For Jewelry
(OnlineJewelryAcademy)
2. Shop Talk #29, Carburetor Ultrasonic Cleaning Solution --- Video #184
(kwrightway)
3. Carburettor cleaner fluid for Ultrasonic Cleaners (before and after)
(Best Ultrasonic Cleaners Ltd)
4. Ultrasonic cleaner for repairing Macbook logic boards.
(Louis Rossmann)
5. Ultrasonic PCB cleaning
(Mend It Mark)
6. Own a Ultrasonic Cleaner? Do you use this solution in it? #ultrasonic #ultrasonicsolution
(How 2 Wrench)

You might also like

Latest Posts

Article information

Author: Twana Towne Ret

Last Updated: 08/04/2022

Views: 6313

Rating: 4.3 / 5 (64 voted)

Reviews: 95% of readers found this page helpful

Author information

Name: Twana Towne Ret

Birthday: 1994-03-19

Address: Apt. 990 97439 Corwin Motorway, Port Eliseoburgh, NM 99144-2618

Phone: +5958753152963

Job: National Specialist

Hobby: Kayaking, Photography, Skydiving, Embroidery, Leather crafting, Orienteering, Cooking

Introduction: My name is Twana Towne Ret, I am a famous, talented, joyous, perfect, powerful, inquisitive, lovely person who loves writing and wants to share my knowledge and understanding with you.